- Toast Community
- Discussions
- Restaurant Operations
- making printer louder
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Printer Friendly Page
03-22-2023 02:36 PM
Our bar printer makes no noise when tickets come out. Thus, the bartenders rarely hear it and and the servers are having to wait for drinks. However, the kitchen printer is significantly louder (making that "ticking" noise kinda like an old adding machine). Is there a way to change the setting on the bar printer to make it louder?
Solved! Go to Solution.
- Labels:
-
Technical Question
03-28-2023 11:59 PM
So your bar printer is a thermal printer therefore its not going to be loud.
Due to the heat in the kitchen your kithen printer uses a ribbon and actual ink to print (dot-matrix) printer. If you want that style of printer for your bar you can order another printer for the bar and use it specificially for service tickets. Youu can also take any tablet for put a KDS at your bar for drinks and have it make a noise for each order and print upon fulfillment. (unoficcially you can literally take any android tablet and use it for this, like even an old grubhub tablet etc..)
03-22-2023 02:43 PM
what's the model of your printer?
03-22-2023 02:55 PM
I may have to get back with you tomorrow on the model. I do know that the kitchen printer uses 2-ply paper and the bar does not. Could that be the difference?
03-22-2023 03:10 PM - edited 03-22-2023 03:14 PM
If you use thermal printer paper for bar, most likely you have a toast printer, which has built-in chime and will beep when receiving an order. You can access the printer setting by doing the followings:
1) press and hold powder button for 1 - 2 seconds to turn off printer
2) press and hold the FEED button (triangle symbol) while turning on printer
3) Press and hold FEED to configure printer. Printer will print out a configuration menu.
Go to "Configuration" - 3 >> "Beep Settings" - 8 >> "Enable Internal Buzzer" -3
You can also choose "beep mode" which is just variations of beep alarm, such as 1 long beep or 4 short quick beeps. There are 8 different modes.
To navigate through the config menu, press and hold FEED for more than one second to register your input. For example, to go to configuration sub-menu press FEED 3 time and follow by pressing and holding FEED for 1 sec.
03-23-2023 01:14 PM
Here is a video of how to do it as well. https://central.toasttab.com/s/article/Configuring-the-Toast-TP200-Printer-Beep-Sounds
